Lagrangian Volume Deformations around Simulated Galaxies

We present a detailed analysis of the local evolution of 206 Lagrangian Volumes (LVs) selected at high redshift around galaxy seeds, identified in a large-volume $\Lambda$ cold dark matter ($\Lambda$CDM) hydrodynamical simulation. The LVs have a mass range of $1 - 1500 \times 10^{10} M_\odot$. We follow the dynamical evolution of the density field inside these initially spherical LVs from $z=10$ up to $z_{\rm low} = 0.05$, witnessing highly non-linear, anisotropic mass rearrangements within them, leading to the emergence of the local cosmic web (CW). These mass arrangements have been analysed in terms of the reduced inertia tensor $I_{ij}^r$, focusing on the evolution of the principal axes of inertia and their corresponding eigendirections, and paying particular attention to the times when the evolution of these two structural elements declines. In addition, mass and component effects along this process have also been investigated. We have found that deformations are led by dark matter dynamics and they transform most of the initially spherical LVs into prolate shapes, i.e. filamentary structures. An analysis of the individual freezing-out time distributions for shapes and eigendirections shows that first most of the LVs fix their three axes of symmetry (like a skeleton) early on, while accretion flows towards them still continue. Very remarkably, we have found that more massive LVs fix their skeleton earlier on than less massive ones. We briefly discuss the astrophysical implications our findings could have, including the galaxy mass-morphology relation and the effects on the galaxy-galaxy merger parameter space, among others.Comment: 23 pages, 20 figures. Minor editorial improvement

On the entropy of a stealth vector-tensor black hole

We apply Wald's formalism to a Lagrangian within generalised Proca gravity that admits a Schwarzschild black hole with a non-trivial vector field. The resulting entropy differs from that of the same black hole in General Relativity by a logarithmic correction modulated by the only independent charge of the vector field. We find conditions on this charge to guarantee that the entropy is a non-decreasing function of the black hole area, as is the case in GR. If this requirement is extended to black hole mergers, we find that for Planck scale black holes, a non-decreasing entropy is possible only if the area of the final black hole is several times larger than the initial total area of the merger. Finally, we discuss some implications of the vector Galileon entropy from the point of view of entropic gravity

Phenotypic diploidization in plant functional traits uncovered by synthetic neopolyploids in Dianthus broteri

Whole-genome duplication and post-polyploidization genome downsizing play key roles in the evolution of land plants; however, the impact of genomic diploidization on functional traits still remains poorly understood. Using Dianthus broteri as a model, we compared the ecophysiological behaviour of colchicine-induced neotetraploids (4xNeo) to diploids (2x) and naturally occurring tetraploids (4xNat). Leaf gas-exchange and chlorophyll fluorescence analyses were performed in order to asses to what extent post-polyploidization evolutionary processes have affected 4xNat. Genomic diploidization and phenotypic novelty were evident. Distinct patterns of variation revealed that post-polyploidization processes altered the phenotypic shifts directly mediated by genome doubling. The photosynthetic phenotype was affected in several ways but the main effect was phenotypic diploidization (i.e. 2x and 4xNat were closer to each other than to 4xNeo). Overall, our results show the potential benefits of considering experimentally synthetized versus naturally established polyploids when exploring the role of polyploidization in promoting functional divergence.España Ministerio de Ciencia e Innovación project POLYTRANSECO (PGC2018-098358-B-I00)Spanish Ministerio de Universidades (FPU19/02936

Development of a Biodegradable Subcutaneous Implant for Prolonged Drug Delivery Using 3D Printing

Implantable drug delivery devices offer many advantages over other routes of drug delivery. Most significantly, the delivery of lower doses of drug, thus, potentially reducing side-effects and improving patient compliance. Three dimensional (3D) printing is a flexible technique, which has been subject to increasing interest in the past few years, especially in the area of medical devices. The present work focussed on the use of 3D printing as a tool to manufacture implantable drug delivery devices to deliver a range of model compounds (methylene blue, ibuprofen sodium and ibuprofen acid) in two in vitro models. Five implant designs were produced, and the release rate varied, depending on the implant design and the drug properties. Additionally, a rate controlling membrane was produced, which further prolonged the release from the produced implants, signalling the potential use of these devices for chronic conditions

Cellulose Nanofibers and Other Biopolymers for Biomedical Applications. A Review

Biopolymers are materials synthesised or derived from natural sources, such as plants, animals, microorganisms or any other living organism. The use of these polymers has grown significantly in recent years as industry shifts away from unsustainable fossil fuel resources and looks towards a softer and more sustainable environmental approach. This review article covers the main classes of biopolymers: Polysaccharides, proteins, microbial-derived and lignin. In addition, an overview of the leading biomedical applications of biopolymers is also provided, which includes tissue engineering, medical implants, wound dressings, and the delivery of bioactive molecules. The future clinical applications of biopolymers are vast, due to their inherent biocompatibility, biodegradability and low immunogenicity. All properties which their synthetic counterparts do not share

Influence of Dynamic Balance on Jumping-Based Asymmetries in Team Sport: A between-Sports Comparison in Basketball and Handball Athletes

The aims of the present study were to analyze mobility, dynamic balance and lower-limb strength and the prevalence of asymmetry according to the type of sport and assess the association between inter-limb asymmetry and sports performance. A total of 23 basketball and 25 handball players performed a test battery consisting of functional movements and a jump test. Inter-limb asymmetry was calculated using a standard percentage difference equation. A between-groups comparison analysis was carried out, and Pearson’s correlation coefficients (r) were calculated to establish a relationship between asymmetries and physical performance. The results found athletes in different sports to exhibit different performance in functional movements and the jump test, but no bilateral asymmetries. The reactive strength index (RSI) and stiffness asymmetries were significantly associated with the anterior reach Y-balance test (YBT) (r = -0.412; p < 0.01 and r = -0.359; p < 0.05, respectively), and the unilateral triple hop test (THTU) was negatively correlated to anterior reach, posterior lateral reach YBT and YBT composite YBT (r = -0.341 to -0.377; p < 0.05). These findings suggest that the asymmetries exhibited important dispersion not dependent upon the type of sport but on each individual and the applied test. In addition, asymmetry in anterior direction YBT showed the strongest association to the rest of the sports performance variables

Feasibility of Vermicomposting of Spent Coffee Grounds and Silverskin from Coffee Industries: A Laboratory Study

In the coffee industry, several by-products are generated during the production and consumption of coffee and represent an important waste from an environmental viewpoint. For improving the knowledge about this issue, a laboratory vermicomposting study of coffee silverskin (CS) and spent coffee grounds (SCG) spiked with mature horse manure (HM) in different proportions and using earthworm Eisenia andrei was carried out. The 60-day study focused on biological parameters such as total biomass gain, growth rate, cocoon production, and mortality. This study also investigated whether the vermicompost obtained could be useful and lacked toxicity through a seed germination test using hybrid wheat seeds. Results showed a disparity depending on the type of residue and the mixture used. Best options were those treatments with a medium–low amount of residue; 25% for SCG and 25% or 50% for CS. In addition, lack of toxicity was confirmed in all treatments. In conclusion, it is possible to carry out a vermicomposting of SCG and CS with some specific features.This research was funded by Government of Navarre and European Regional Development Fund (ERDF) grant number VERMICOMPOSTAJE 4.0—VERMIOT (0011-1365-2019-000110), research project. The APC was funded by Fundación Euskoiker

Antioxidant PLA Composites Containing Lignin for 3D Printing Applications: A Potential Material for Healthcare Applications

Lignin (LIG) is a natural biopolymer with well-known antioxidant capabilities. Accordingly, in the present work, a method to combine LIG with poly(lactic acid) (PLA) for fused filament fabrication applications (FFF) is proposed. For this purpose, PLA pellets were successfully coated with LIG powder and a biocompatible oil (castor oil). The resulting pellets were placed into an extruder at 200 °C. The resulting PLA filaments contained LIG loadings ranging from 0% to 3% (w/w). The obtained filaments were successfully used for FFF applications. The LIG content affected the mechanical and surface properties of the overall material. The inclusion of LIG yielded materials with lower resistance to fracture and higher wettabilities. Moreover, the resulting 3D printed materials showed antioxidant capabilities. By using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) method, the materials were capable of reducing the concentration of this compound up to ca. 80% in 5 h. This radical scavenging activity could be potentially beneficial for healthcare applications, especially for wound care. Accordingly, PLA/LIG were used to design meshes with different designs for wound dressing purposes. A wound healing model compound, curcumin (CUR), was applied in the surface of the mesh and its diffusion was studied. It was observed that the dimensions of the meshes affected the permeation rate of CUR. Accordingly, the design of the mesh could be modified according to the patient’s needsThis work was supported by the Wellcome Trust Biomedical Vacation Scholarship (SS 213361/Z/18/Z) and the Society for Applied Microbiology Student Placement ScholarshipS